READ AND COMPLETELY UNDERSTAND THIS MANUAL BEFORE USING THE 3C VORTEX GASOLINE INDUCTION CLEANING SYSTEM!
ATS Chemicals cannot be responsible for any action taken by a shop or technician that is not stated in the following information. Operating outside of these guidelines is done so at the user’s own risk.
THIS SYSTEM IS FOR USE IN MULTI-PISTON GASOLINE POWERED ENGINES ONLY!
• Never mix other brands of chemical with 3C Chemicals. ADVERSE CHEMICAL REACTIONS MAY OCCUR!
• Do not use any other chemicals in the 3C Vortex. ENGINE DAMAGE WILL OCCUR!
• Never add chemical to the reservoir without the engine running. ENGINE DAMAGE MAY OCCUR!
• Always use common sense when using the 3C Vortex system.
• Wear eye protection and always use nitrile or latex gloves.
• Have a fire extinguisher available in the area.
• Run the vehicle outside or in a well-ventilated area.
• Make sure the vehicle’s engine oil and coolant levels are at the correct levels.
• Check for both pending and hard DTCs.
• If the vehicle’s engine is making any unusual noise check and repair prior to cleaning.
• If the engine is misfiring check and repair misfire before cleaning the engine.
• The 3C Vortex will start and stop manually by opening and closing the 3C chemical control valve. If there is a problem, first turn off engine and then close the 3C chemical control valve.
• If you need help or have questions, call 800-572-6112 for assistance.