505CRF and 505CRO Pour-in Testimonial
I own a 2007 Suzuki XL7 with 230K+ miles. Engine was sluggish until I poured the fuel system cleaner into the tank. Now the engine rumbles ready for business!!!
When I did the oil change I used the oil additive and noticed substantially less knocking and rattling. Great products both!!!
Richard Goodlette
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
Your product saved me from having to spend thousands on my 2010 audi a4 with a bad oil consumption issue. I know absolutely nothing about cars, seriously nothing, but your products were simple to use and actually did the job. I tried a few other products with no success and was looking at having to spend $3000 on just testing to determine if my car was in fact burning oil at a higher rate than audi deemed OK (it was 200 miles/quart). Scotty Killmore mentioned your product as a must have and I took a chance.
So again thank you for making a quality product!
Rebecca Robertson
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The best oil treatment we have ever used. This product does what it was engineered to do, it works! We have many satisfied customers who were burning oil, and after the treatment with 505CRO the vehicle runs great with no more oil loss. We are completely satisfied with the oil treatment and will continue to use it often.”
James Richmond, Bandon Auto Repair LLC.
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The ATS fuel and oil additives are great stuff. Using the additives I was able to repair several vehicles. I had a Honda CRV that was consuming oil at a great rate. We thought the engine was shot, but decided to try the 505CRO on it. To our amazement it fixed the heavy oil consumption problem. Using the 505CRO I have fixed several cam phasers that were stuck. Additionally this product has repaired several lifters as well. The 505CRF fuel additive cleans carbon off of valves and fuel injectors. This stuff just works!”
Steve Lamb, Firestone Complete Auto Care
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The ATS 505CRF fuel treatment works great!”
Antony Zaccagnino, Glenville Shell
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The 505CRO oil treatment is amazing. The results on MINI Coopers are just hard to believe, this treatment works so well on them, it is hard to believe. These ATS chemical products are really, fantastic! We used the 505CRO on a Chevy with over 100,000 miles on it with noisy lifters. After one treatment the lifter noise was gone. We have repaired several sticky lock pin cam actuators with DTC’s, after just one treatment the cam phaser was repaired. We believe that the 505CRO (oil treatment) and 505CRF (fuel treatment) should be used as regular maintenance. No question these are GREAT products that REALLY WORK!”
Robert Denley
Bob Denleys Foreign Auto
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“We have a high concentration of Subaru’s in our area. When one comes in smoking and with high oil consumption, one treatment with ATS 505CRO Oil Pour-In and the problem’s solved every time!”
Tim Harding
Precision Performance Tire Factory
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The 505 Oil system treatment is the most powerful oil system cleaner we have ever used. I have used it several times to cure lifter noise and free stuck piston rings causing excessive oil consumption. The product has also cured timing chain noise caused by a sticking timing chain tensioner. We always recommend the 505 oil system treatment before any engine disassembly for carbon deposits causing internal engine noise concerns.”
“We use the 505 fuel system cleaner to clean fuel injectors in gasoline and diesel engines. To keep the fuel injection system clean we put a can in the fuel tank when performing a service on our customer’s vehicles.”
Gary Machiros
Angie’s Automotive Service Center
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The 505 CRO is Fantastic! We had a BMW with sticking cam phasers and after the treatment with 505CRO the car was fixed. We really believe in this product. In fact we are so impressed with the results we are now ready to purchase the ATS 3C system.”
Steve Rozansky
Friendly Auto Centers
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“Our company does mobile automotive repair, we use ATS chemicals products to fix drive-ability problems for the shops that we service. In my 30 years of experience I have never seen a chemical fix problem vehicles so quickly. The ATS fuel additive has worked well for us and we highly recommend ATS chemicals.”
Rick Layton
Director, Diagnostics on Wheels, Inc.
“Solutions For Your Diagnostic Dilemmas”
NASTF ST Committee Member
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
”We had a customer with severe lifter rattle on his GMC 5.7. Since we started using the ATS 505CRO Oil Treatment, the lifter noise is gone and power has been restored.”
Ted Pisarski
Complete Auto Repair
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“We have been using the ATS 505CRO oil treatment for a few months and have fixed several cars. The first example was a 2003 BMW 325i which was using a quart of oil every 1000 miles. This car has 160,000 miles on it and thought this was a long shot. After the treatment we were amazed at the reduction. Consumption was down to near zero. The second example was a 2007 Audi A6 with 72,000 miles. It had timing codes and excessive timing chain rattle. 505CRO once again cleared up our problem. I believe with extended oil service intervals 505CRO is the perfect solution for many carbon and sludge issues. So far results have been beyond my expectations. I Highly recommend this product.”
Andreas Wittler
Owner Hans Wittler’s Automotive
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“We have been using ATS chemicals for over a year and have been very happy with the performance they provide. The 505CRF fuel treatment has been effective at repairing many drive-ability problems as well as increasing the mileage of the vehicles that we have treated by 1 to 3 miles per gallon. Our customers are very satisfied when we use the ATS products. This stuff works great!”
Eric Dibner
Euro Auto
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The 505CRF fuel treatment is so good, its Great!”
Simon Fares
Gasco Auto Service
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“Had a Chevy with 60,000 miles on it that was carboned up. We took the intake manifold off and cleaned it with another manufactures cleaning product, but the check engine lamp kept coming on. We then had someone tell us about the ATS 505CRF fuel treatment so we tried it, and it absolutely fixed all the problems with the Chevy truck. Sure made a believer out of me, this stuff really WORKS!”
Blake Bocker
Shippers Auto
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“I have used the ATS 505CRF with great success. Our shop has had multiple engines with misfiring cylinders caused by coked fuel injectors. To our surprise the ATS Fuel treatment fixed the misfiring cylinders with one application. I highly recommend all of the ATS chemicals they really work!”
Darren Trujillo
Automotive Electric Specialists
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The 505CRO is a wonderful product. Within 15 minutes of use the cars totally change over and run great. Better response, more power. This stuff works Great!”
Francisco Curiel
Jiffy Lube Multicare
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“We have had a lot of positive feedback on the ATS chemical treatments that we have applied.”
Mike Lambert
Rock River Lubrication
________________________________________________________________________________________________________________________________________________
505CRF and 505CRO Pour-in Testimonial
“The ATS 505 CRO oil flush has fixed multiple oiling issues on vehicles in our shop, from Variable valve timing codes caused by clogged oil passages to noisy lifters on my personal Chevy pickup truck. This is a great service to offer to your customers! That why we recommend the ATS 505 CRO.”
Bill Fichtorn
Master L1 technician
AutoClinic
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The ATS 3C machine works very well. It removes carbon and restores the power and response to the vehicle engine. This system is easy to use and provides great results. Our students using the system for the first time are able to do so with no problem. We are very happy with the 3C machine.”
Tom Rayk
________________________________________________________________________________________________________________________________________________
3C Testimonial
“I really like the 3C system, it is simple to use and actually works! We cleaned a vehicle with a slight misfire when started cold and after carbon cleaning with the 3C system the misfire was gone. We also had a CRV Honda that had gone to the dealership and were told the cats needed replacement, a very expensive repair. After we received the vehicle and cleaned the induction system with the 3C, the problem was resolved, no cats were replaced and the vehicle ran great. We have also used the 3C system for general maintenance on vehicles with no apparent problems. After cleaning many vehicles I can say they ran better with better throttle response. One such vehicle was a jeep Grand Cherokee, we bore scoped the induction system with our ATS inspection camera and determined it had quite a bit of carbon in the intake port area. After cleaning the engine and re-borescoping the induction system the carbon had been removed, and the vehicle ran much better. Yet another example was a Toyota Tundra with only 50,000 miles on it. I did not think that we would see any difference on this vehicle since the owner uses synthetic motor oil with regular oil change intervals. However I was amazed with the power difference and throttle response after cleaning with the 3C. I can recommend the 3C system it works.”
Jerry Stewart
Advanced Auto Parts Training
Curriculum Developer
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We picked up a 3C machine from ATS Carbon Clean after seeing some examples at the show and we have not been disappointed! They recommend using the 3C machine as preventative as well as when the engine has heavy carbon built up on the valves. Cleanings take about 15 -20 minutes and is done with the engine running. The difference between anything store bought such as CRC, Seafoam, BG or any other chemical is how it’s being introduced into the intake. I encourage anyone that deals with this on a regular basis to look into ATS carbon Clean. It’s super simple to set up. We also tried their oil and fuel pour-in 505 on some vehicles that had heavy sludge in the engine oil. It worked fantastic! We have recommended it to a number of our good customers since we received it and the response from vehicle owners as far as return in performance and MPG was completely noticeable. Highly recommend!”
Robert Reynolds
Pueblo Tires & Service in Weslaco, Texas
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Direction Injection and Carbon Build Up:
Traditionally fuel injectors are placed so that fuel sprays inside the intake tract allowing your fuel and all the additives in it to wash over the valves inside your engine. This design allowed a self-cleaning design. Imagine drinking from straw. The liquid running past your esophagus also cleans your esophagus and the valve that closes access to your stomach.
Now imagine you put that straw directly into your stomach. Vehicle manufactures are now moving towards a more fuel-efficient engine design called GDI. Direct injection puts the fuel right into the cylinder. Over time there’s an acid re flux that builds up creating a carbon plaque on the valves. The carbon can fall into the cylinder or prevent the valve from making a complete seal.
This carbon builds up on other important component causing a decrease in power and fuel economy. At it’s worse it can cause a check engine light, drivability issues… costing you downtime with your vehicle and expensive repair costs.
Some manufactures recommend cleaning your fuel system every 15k miles to prevent this carbon build up. When there is already heavy carbon build up in your engine you have a few choices on how to address it. You can open the engine up and manually remove the carbon. This method is very intrusive and very labor intensive. You can also use chemicals to remove the carbon. There are numerous products on the market that promise a good deep clean often with marginals results. For preventative maintenance we use BG products.
Recently we had an 07 BMW 335 that came in with smoke bellowing at a cold start. The customer was prepared to replace both turbos. For carbon build up this tough we had to get the big guns out. The product we used is from an American based company called ATS Chemicals. For a fraction of the cost of the turbos we were able to decarbon his engine.”
Oscar Garza Jr.
J & T Automotive
________________________________________________________________________________________________________________________________________________
3C Testimonial
“In the past I have tried several leading chemical companies’ induction cleaning products. None of them even come close to cleaning intake systems like the 3C intelligent induction cleaning system. On direct injection systems it literally strips the carbon from the cylinder head intake ports down to bare metal. Intake valves can also become carbon free. I have proved the cleaning power of the 3C system using a borescope looking at the intake ports before and after using the induction cleaning product. The difference is incredible. The cleaner is not for just direct injection systems; many times I have cured drive-ability concerns on port fuel injection systems with the 3C cleaning system. This induction cleaning system is the best I have ever used to remove carbon from intake systems.”
Gary Machiros
Angie’s Automotive Service Center
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Hi Everyone, I just wanted to take a minute to acknowledge an AWESOME invention. As many of you know, I have been teaching dealers and independent shops about fuels, oils, synthetics and how carbon forms and affects drivability for over 18 years working for some major chemical distribution companies.
I have also been using (and teaching) scan and scope data to “Baseline” engines during diagnostics since 1995, when I decided that there was a way to either prove or dispute a chemical company’s claims of clean-up success in the engine, using their product. I have baselined thousands of engines this way over the years.
I want to tell you that without a doubt, ATS has “cracked the code” for carbon removal in these GDI engines. I have been working with the 3C system now for more than 10 months, and I can tell you that I have never seen such a consistent result and correction from ANY other product I have worked with. Right down to the metal cleaning in most cases! (Check out my MOTOR Magazine – April 2019 Driveability Corner article, where we use the 3C to untangle a diagnostic problem with a GDI Lexus!)
We have been using the 3C to correct deposit-related misfires, MAF plausibility codes, lean and rich codes and other deposit-related failures in our technical support business. When combined with in-cylinder pressure testing and some baseline scan data from EScan, This system becomes a WEAPON in solving these pesky intermittent misfires and GDI performance issues quickly, and without engine disassembly.
All you need is some before and after scan data and a few before and after borescope pictures to quickly become a true believer in the effectiveness of the 3C System. The chemistry and patented layering process work incredibly well. And don’t forget the source of the issue, cleaning those piston rings. The 3C Oil System Treatment will wake up compression and slow the consumption of oil. Awesome product, ATS! (P.S., My wife’s SRX 3.6GDI gained a real world 3.5 MPG increase after the fuel and oil service!)”
Gary Smith,
AutomasterTraining.com
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Our shop specializes in difficult vehicles where most of our customer base are other shop in our area. Many of the newer vehicle are equipped with GDI engines. These engines can have large carbon build up in the intake system that creates drive-ability issues and or DTC’s to set. We have found that cleaning the carbon out of the intake system increases the power output and fixes the drive-ability and DTC issues. We used to hand clean these engines, but have found that the ATS 3C system can clean these carbon build up problems in just 30 minutes. This allows us more time to work on other vehicle which makes us more profitable.”
Darren Trujillo
Automotive Electric Specialists
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We have used many different intake cleaning systems and many different intake cleaning fluids over the years. Unfortunately when we use these products we still have to remove the intake manifold and hand clean the intake port area. We starting using ATS chemicals about a year ago and were amazed when the valve and port area were actually cleaned. Even with heavy carbon deposits in the intake port the ATS 3C system provides good cleaning. My customers are very happy when their vehicle runs better with less of their hard-money spent. I highly recommend this system.”
Eric Dibner
Euro Auto
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We have used most major brands carbon cleaning chemicals with disappointing results. The 3C induction cleaning machine is the first cleaning process I have used that actually works. I highly recommend this system.”
Eric Hartley
European Motor Cars
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Oh my god this tool is fantastical who knew I can clean GDI motors so fast and effortlessly. I love it and so do my customers. Thanks ATS!”
Fadi Qumbargi
Brookfield Auto Care
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Independent Vehicle Service was founded in 1983 and is located in Albuquerque New Mexico. Independent Vehicle Service has 11 service bays with 3 service writers and specializes in Volvo and European vehicles. However we do work on all makes and models for our better customers. Independent Vehicle Service has used all of the industry’s big name induction cleaning chemicals over the years. However all of these chemicals have fallen short of our expectation. We would clean the induction system with these chemicals and the drivability problems were still present, and when we used the borescope to inspect these engines they still had high concentrations of carbon in the induction system. These engines then had to be physically cleaned.
For the past three years we have been a beta test site for ATS Chemical, Independent Vehicle Service has sent many vehicles over the years for chemical induction system carbon removal. Initially we saw improvements over the disappointing performance of all the industry’s big name products. The intake manifolds, runners and charge valves coming back from ATS Chemical were cleaner than we had seen with the big name brands but the valves and stems where still unsatisfactory. Admittedly we sent them primarily heavily carboned engines. We were not confident that chemical cleaning offered satisfactory results so frequently we would physically clean engines after the chemical treatments. During this last year of beta testing we have witnessed quantum leaps in cleaning efficacy. Now the claustrophobic cave like burrows and tunnels we were sending out returned as the clearly distinguishable valves, stems, and guides of an internal combustion engine. We have borescope imaging proof that chemical induction cleaning is actually a viable repair.
With today’s complex engine and combustion management systems some amount of our testing is “rule out”. Many times an early step in diagnosing a GDI engine is selling a physical induction service that may cost several hundreds of dollars with the caveat that the service is necessary but may not be the final repair. Now imagine doing a 20-30 minute service with affordable chemistry confident that any carbon related symptom will be resolved. It’s a game changer at the front desk, for the customer and for our technicians.
Until the advent of GDI the Volvos we worked on never had induction carbon depositing issues. Now these same vehicles with GDI have noticeable carbon build up by 30K miles and we’re seeing that depositing symptomatic as early as 50K. No current GDI engine is immune. Recommending chemical induction cleaning with ATS Chemicals’ proprietary automated three chemical delivery system every 30K miles is a wise servicing for anyone planning on keeping their GDI vehicle beyond 50K miles.”
David Lang
Founder Independent Vehicle Service,
2017 Bosch ASE Master Mechanic of the year.
ASE certified Master Technician, with L1, L2, and L3
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We started selling and using the ATS Chemicals line after Bernie sent me some samples to try. Just the 505CRF fuel system additive gave us an average of 13% increase in fuel economy on the 2 gas and 1 diesel vehicles that we tried it on. That helped us make the decision to get involved with the 3C intelligent carbon cleaning system. We have used it on numerous GDI vehicles for our customers with noticeable improvements in WOT performance, idle quality and even light throttle performance. I have never seen a product that has such a noticeable improvement that even the vehicle owners comment on it. It seems that the performance deteriorates over time and they don’t realize it until it has been cleaned with the 3C system. We have even used the 3C system to successfully clean vehicles that have been cleaned by competitor chemicals with no improvement at all!! We are so excited by this that we are now the ATS chemical reps in Texas making this the first time our company has ever attached our name to a product!!”
Rick Layton
Director, Diagnostics on Wheels, Inc.
“Solutions For Your Diagnostic Dilemmas”
NASTF ST Committee Member
________________________________________________________________________________________________________________________________________________
3C Testimonial
“For the last two years we have been beta testing the ATS 3C Intelligent Induction Cleaner and have been amazed with the results. We had previously been performing “walnut blasting” to clean carbon buildup. Some walnut blasting operations were taking us as much as 9 hours, but with the ATS 3C induction machine (in most cases) you are done in less than half an hour, with equally good results. As a busy European automotive repair shop, we have seen multiple car lines with light to heavy carbon buildup. We have started recommending the induction clean as a preventative maintenance service because we have noticed that even cars with only light carbon buildup can really benefit. Many times customers will bring in vehicles with no drive-ability complaints but after cleaning you can actually perceive a major change in power and drive-ability. On more severe cases we have fixed boost plausibility codes, misfires, and low power. I highly recommend the 3C Intelligent Induction Cleaner. It works just as advertised. This is just another way to save your customer money while making your shop more efficient and profitable.”
Andreas Wittler
Owner Hans Wittler’s Automotive
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We have had very good feedback from our customers who have had their vehicles cleaned with the 3C system. Most say there vehicle has better power with an increase in fuel economy. Our BMW and MINI customers have told us they notice an extreme difference in the vehicles performance. Our shop has cleaned well over 120 vehicles using the 3C system and we are very pleased with this system.”
Sherwood Cooke
Royalty Auto Service
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C machine works great. Easy to use with great results. It’s a great service that we can easily sell to our customers. It does exactly what it says it does, removes carbon quickly. We are very happy with our purchase of the 3C system.”
Frank Cerrones
Cerrones European
________________________________________________________________________________________________________________________________________________
3C Testimonial
“I love the 3C. I am very happy with this product. I have had customers come back after cleaning to let me know how much better their vehicle is running. I don’t use products I do not believe in, but I believe in the 3C!”
Brian Fucci
Autoworks
________________________________________________________________________________________________________________________________________________
3C Testimonial
“A Mazda CX7 with 151129 miles on it. Owned by very good folks that bring all of their vehicles to my shop for repairs and maintenance.
This Mazda was in a while back for the MIL being on and running poorly. One of my techs checked codes, pulled a P0304, cleared codes and test drove the vehicle to gather current data. After some extensive testing… Intake vacuum waveform, compression waveform,
e-misfire, and some data analysis. The recommendation given to me to sell was to try a set of plugs and intake valve chemical cleaning…at that time we used BG chemicals, (excellent product) the job was sold and plugs were replaced followed by the chemical valve cleaning. The car still had the misfire and was re-tested.
The re-tests suggested that there was a mechanical problem and should have the head removed and checked by a machine shop. The customer declined that repair saying the vehicle was not worth that amount of money.
Fast forward to my purchasing the 3C cleaning equipment from ATS. I received the equipment and went through my customer’s vehicles to find a GDI vehicle that I could get the owner to bring me to do a free service on for my personal evaluation prior to selling the services to other customers. The vehicle that was brought to me was a 2015 Captiva with 46,000 miles on it and no issues that I or the vehicle owners noticed. No codes were stored or pending. The service was completed after getting before carbon deposit captures with the ATS inspection camera to compare with the after service inspection.
The results were what I have come to expect from ATS, it did as advertised, which I knew would be the case. Afterward, I was thanked by the owner for the improved performance when nothing was noticed in the beginning. Funny how we just adjust to things that happen slowly over time.
Now back to the Mazda CX7. I called the customer to bring the vehicle back in and re-tested it to see if the issue was mechanical. No sense spending more of the customer’s money that would not fix the problem. First codes where pulled, P0304 is still present, also the fuel trims indicate that there was a large positive correction. We then ran an in-cylinder compression test on two cylinders, both were almost the same representation as far as compression, valve events, and peaks variation. There was definitely a misfire on cylinder 4, but it was not mechanical.
I had the customer’s approval to do the service with the ATS 3C if I determined that I didn’t have mechanical issues. So on with the service… Pre-cleaning data and deposit pics gathered, service completed after data and pics gathered. The carbon was gone along with the misfire, the acceleration was improved, and fuel trims were improved as well!”
Rusty A. Flake
Advanced Automotive Diagnostics and Repair Owner/Technician
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C cleaning system is a great machine. This system is time saving with a great end result.”
Jason Cohen
Foreign Car Specialists
________________________________________________________________________________________________________________________________________________
3C Testimonial
“I’ve been in the industry for 36 years and used many different manufactures chemicals. The C3 intelligent induction cleaner performs better than advertised every time I’ve used it. Here on the Oregon coast I service a lot of marine as well as automotive applications. I have had several clients bring their boat in for drivability issues after setting over the winter. I use the 505CRF fuel system cleaner to clean the injectors and unstick them, it really works.
I also use the 3C induction cleaner on all of direct injection engines, including marine. After I have used the 3C CLEANER on their boats, I have had great reviews back from the owners. The 3C system has increased my profits from drivability issues. We have found that cleaning the carbon out of the intake system increases the power output and fixes the drive-ability. I WANT TO THANK ATS AND THERE CREW FOR CONTINUING THERE LEADING EDGE TECHNOLOGY AND PROVIDING EASY TO USE DIAGNOSTIC EQUIPMENT.”
Tim Harding,
Precision Performance
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We have had good results with the 3C system. This system works and we plan on using it a lot.”
Brian Martin
Auto Tech Services
________________________________________________________________________________________________________________________________________________
3C Testimonial
“I have cleaned a lot of GDI engines over the last year with the 3C system. I borescope the engines before and after the cleaning procedure. The amount of carbon that the 3C removes from the intake manifold and valve is incredible. After a cleaning with the 3C the customers can feel the difference from the engines throttle response. This system just works.”
Guada Garcia
IVS Imports
________________________________________________________________________________________________________________________________________________
3C Testimonial
“This company continues to amaze us with the best tools on the market. Automotive Test Solutions is on the cutting edge of the best diagnostic equipment/tools ever made in our opinion, We just received their 3C Intelligent Induction Cleaner this week. This machine is a carbon deposit eliminator! Short of removing the intake manifold and walnut blasting the intake valves, you really can’t get cleaner than this. In addition it cleans the entire induction system, pistons, and spark plugs. If you are a GDI owner, call us before you have your intake removed for cleaning. We guarantee results with before and after pictures, and we can save you a lot of $$$.
Most vehicles (GDI or Port Injected) experience a slow progressive decline in performance over the years. Mileage falls off, power declines, and sometimes the customer does not even realize it! We can make your car run like new! With modern day complex engine designs, stringent oil requirements, and array of different fuels additives in our fuel…this service is an imperative maintenance item.”
Paul LeBlanc
Pauls Auto Repair, LLC.
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C is very easy to use, and works great.”
David Wostarek
Northwest Imports
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C does a great job. We had a customer with a MINI Cooper whose engine was missing on the #2 cylinder. We used a borescope and determined the engine had extensive carbon in the intake system. The #2 cylinder had a large piece of carbon holding the valve open causing a low compression reading. We decided to try the 3C system on this vehicle, to our amazement it removed the carbon from the induction system and restored the #2 cylinder compression.”
Robert Wieczrak
G&M Automotive
________________________________________________________________________________________________________________________________________________
3C Testimonial
“I have used the 3C system on many vehicles where we inspected the intake with a borescope before and after the induction cleaning. The 3C really works at removing carbon from the engine. Our customers have called us back after a cleaning with the 3C to give us the thumbs up and let us know how happy they are with the performance of their vehicle after the 3C cleaning. We are very pleased with the 3C system.”
Joel Leborn
Joel’s Automotive Repair
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C machine works great! One of our customers with a BMW could not believe how good his car ran after a cleaning using the 3C and ATS chemicals.”
Wayne Pentecost
Wayne & Sons Automotive Repair
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The ATS 3C machine is revolutionary. It has immensely decreased the carbon repair time on vehicles we get that need carbon removal. The problem of purchasing a vehicle equipped with GDI has been solved by the invention of the 3C system. We use the 3C a lot with great results! We really appreciate everything ATS has done in helping the automotive industry.”
Tyler Cathers
Island Sport Works
________________________________________________________________________________________________________________________________________________
3C Testimonial
“We have used the 3C on many vehicles. The 3C is very easy to use while offering excellent results. It is amazing to see the performance difference in the vehicle after cleaning with the 3C. You can actually see the carbon blowing out the exhaust pipe in the form of smoke. Many shops in Iowa have called us to see where we purchased the 3C. This is because they have heard what a great system it is. Word of mouth has created lots of sub-let work for us. We are extremely happy with the results that that the 3C machine provides.”
Brian Skay
Skay Automotive Service Inc.
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Impressive cleaning results start to finish. After cleaning borescope results are excellent, no more carbon.”
Jeremy Robertson
Christian Brothers Automotive
________________________________________________________________________________________________________________________________________________
3C Testimonial
“I recently purchased a 3C Intelligent Induction Cleaner during the SEMMA show and cannot express my amazement in how well this machine cleans carbon. I am the owner of Europa Motors Inc. and we have performed cleaning on Mercedes, Audi, VW, Ford to name a few recent ones. Using a borescope, before and after cleaning, we can really see how well this machine cleans. This machine gave us an income earning opportunity as well as providing an awesome maintenance service to our customers. Thanks ATS!”
Marlon Sabiniano
Europa Motors Inc.
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C machine works excellent. We were amazed when we cleaned a Honda EGR system, the passages literally looked like they had been brushed out after cleaning with the 3C system. Additionally we have cleaned many GDI vehicles with the 3C system, once the carbon is removed the power and response is unbelievable. We are using the 3C for repair as well as maintenance. I am very pleased with the 3C system.”
Julio Gomez
Model A Transmission and Auto Repair
________________________________________________________________________________________________________________________________________________
3C Testimonial
“Realistically the 3C works great. This system does exactly what it’s supposed to do, remove carbon. We are very happy with the results from the 3C.”
Sean Troy
European Road and Racing
________________________________________________________________________________________________________________________________________________
3C Testimonial
“The 3C intelligent induction cleaner is the second purchase we have made from ATS, we also have the Bullseye Leak Detector. The 3C machine works very well and we are very happy with it. Thank you ATS.”
Omkara Auto Repairs
________________________________________________________________________________________________________________________________________________
3C Testimonial
“It seems like every year the book time for intake manifold removal goes up. Also, the need to remove intakes for carbon cleaning on GDI engines maintenance increases. That’s why in our shop, it’s really a no brainier. The ATS 3C machine has saved us countless hours and made us more money while saving the customers hundreds of dollars. The fix is in the ATS 3C machine. This system just works!”
Bill Fichtorn
Master L1 technician
AutoClinic